Handgun Hunter Magazine - Forums: TC .357 Maximum 12" Hunter Barrel Question

You are not logged in. [Log In] Handgun Hunter Magazine » Forums » Discussions » Shooters Bench » TC .357 Maximum 12" Hunter Barrel Question

Page 1 of 1

Topic Options

Rate This Topic

#206974 - 06/01/20 11:11 AM

TC .357 Maximum 12" Hunter Barrel Question

jcp161
enthusiast

Registered: 11/05/08
Posts: 230

Offline

I have one of these and as much as I want it to shoot them, it will not group the 180 grain XTPs I purchased from Reed's. I have a Super 14 in the same caliber that does great with these rounds in that weight and never had a problem in the 10" barrels I've owned in the past.

Anyone know if the rifle twist in these is set up for a different bullet weight? Any thoughts or information would be appreciated.

John

Top

#206975 - 06/01/20 01:08 PM

Re: TC .357 Maximum 12" Hunter Barrel Question [Re: jcp161]

H2OBUG
Pooh-Bah

Registered: 02/13/08
Posts: 2366
Loc: Louisiana

Offline

Check the freebore difference between the barrels.

May want to seat your bullets longer.

Had a similar issue shooting 300 XTPs in my new and old 44 Mag barrels. The newer was cut with the forcing cone. God only knows why they would chamber a barrel this way-- but it wanted the bullets seated way out.

Edited by H2OBUG (06/01/20 01:09 PM)

_________________________
If it jams force it! If it breaks it needed replacing anyway.

Top

#206977 - 06/01/20 04:02 PM

Re: TC .357 Maximum 12" Hunter Barrel Question [Re: H2OBUG]

45MAN
Pooh-Bah

Registered: 08/13/17
Posts: 1790
Loc: brownsville, texas

Offline

BELLM HAS A WRITE UP ON THE FORCING CONE/FREEBORE ISSUES. WHAT I DID WAS SEND HIM A NEWER 12 INCH 357 MAG WHICH HE RECHAMBERED TO 357 MAX, THUS ELIMINATING THE "FORCING CONE".

RECENLY TRADED INTO A BULL BARREL 10 INCH 45 COLT CONTENDER. IT MUST HAVE BEEN CHAMBERED W/O THE FORCING CONE BECAUSE IT IS A SHOOTER!

_________________________
"ADAPT OR DIE". I USE ALL CAPS, NOT BECAUSE I AM YELLING, BUT BECAUSE IT IS AN OLD HABIT FROM MY ARMY DAYS, PLUS IT IS EASIER TO TYPE AND READ.

Top

#206982 - 06/02/20 08:38 AM

Re: TC .357 Maximum 12" Hunter Barrel Question [Re: 45MAN]

jcp161
enthusiast

Registered: 11/05/08
Posts: 230

Offline

Thanks for the replies. While I can and have reloaded for the max, the ammunition I was using was purchased from Reed's. Had good luck with some of their other loads in different calibers and thought I would try it.

I'll stick a bullet in an empty case, close the action and measure it. See if there's a difference in length. Or I'll try some 158 grain loads and see how they do.

My first .357 Max barrel was a 10" Bellm. Good shooter but could never get used to the blast in that barrel length. For me anyway.

John

Top

Page 1 of 1