Page 1 of 1 1
Topic Options
Rate This Topic
#203262 - 11/06/19 09:54 AM Weaver 301 no Drill Scope mount for Ruger SBH
adbhowler
journeyman


Registered: 10/03/18
Posts: 84
Loc: Colorado

Offline
I just ordered and should be here tomorrow, a Weaver 301 scope mount for my Ruger 480 SBH. I am going to get it mounted and to the range this weekend. I am a little concerned about the rings that come with the mount but I thought I would give them a run. Anyone else use this mount and have you had any issues with either the mounts or the provided rings?

Thanks for any insights
_________________________
Mike McBride
---------------
NRA Life Member

"Shush, be vewy,vewy quiet. I'm hunting handguns"

Top
#203277 - 11/06/19 07:20 PM Re: Weaver 301 no Drill Scope mount for Ruger SBH [Re: adbhowler]
junebug
Pooh-Bah


Registered: 10/26/09
Posts: 2292
Loc: Bardstown ,Ky

Offline
I have them on a 4 5/8th. Blackhawk .45 Colt and a 10 in. .44 mag and no problems in several years of use. The .45 gets carried and shot a lot.
_________________________
junebug

Top
#203755 - 11/25/19 10:29 AM Re: Weaver 301 no Drill Scope mount for Ruger SBH [Re: junebug]
adbhowler
journeyman


Registered: 10/03/18
Posts: 84
Loc: Colorado

Offline
So, I guess this might be called a partial bust. Took the gun to the range and the first shot was 2" high at 25 yards. The second shot was a miss. In the midst of unloading the gun to check it out, the rear mount (the one which screws into the 6-48 hole that the open sight screws into) had stripped out and the scope was just flopping around. Looking at the amount of purchase that screw has in the hole, it seems that it is only a few threads into the hole. Maybe a longer screw might cure the issue. I have re-tapped the hole to at least provide some more thread baring surface but don't want to drill it out and tap it for a bigger hole just yet. I know the 6-48 screws are hard to find but Brownells has some that are longer so I have them on order. Dad used to say "3 threads will hold the world" so I must have only engaged 2 LOL Will update if just for my own edification.
_________________________
Mike McBride
---------------
NRA Life Member

"Shush, be vewy,vewy quiet. I'm hunting handguns"

Top
Page 1 of 1 1


Moderator:  Gary, jamesfromjersey, Chance Weldon, Gregg Richter 
Hop to:
 Portal Sidebar
Who's Online
0 registered and 136 anonymous users online.
Top Posters
9765
Whitworth
9608
s4s4u
9261
jamesfromjersey
7643
wapitirod
7327
TCTex.
6672
KRal
5179
Ernie
5056
Gary
4704
Tigger
4461
pab1
4427
Franchise
4373
Chance Weldon
4370
Dan B.
4121
Gregg Richter
3755
johnwilliams
  Member Hunts
An 8 The Hard Way
An 8 The Hard Way

Best Contender Bar
Best Contender Barrels - Custom or Factory?

   Access Requires Login

Generated in 0.042 seconds in which 0.008 seconds were spent on a total of 14 queries. Zlib compression enabled.




Copyright © 2000-2008
HandgunHunt.com, Inc.